Msd 84211 Rotor Phasing Kit for MSD Distributors Insta Manual de usuario descargar pdf

WARNING: Disconnect the battery during installation. When disconnecting the battery, always

remove the negative cable ﬁrst and install it last.

Figure 2 Washer Installation.

MSD Rotor, PN 84211

Adjustable Two Piece Rotor

(For use in place of PN 8467 Rotor)

Parts Included:

1 - Rotor Base

1 - Rotor Top Assembly

1 - Rotor Phasing Tech Brief

The Adjustable Rotor is for use with MSD Distributors using the PN 8437, PN 8433, PN 8431, PN 84333 or PN

84313 Caps. The two piece Rotor provides up to 40° (+/- 20°) of adjustment to achieve proper rotor phasing.

IDENTIFY ROTOR SCREWS

There are two different length screws supplied with this rotor. It is important to determine which screws

are correct for your application due to clearance of the magnetic pickup. There are two styles used;

one is a threaded base with or without a Screw Retainer, the other is a Retainer with a Nut. The Retainer

accepts the shorter 5/8” screw while the Nut version accepts the 3/4” screw (Figure 1).

Note: It is recommended to install the rotor and check the clearance before reassembling the

distributor.

INSTALLATION

Once the rotor screw length is determined, install the rotor base

being sure the round and square aligning pegs are lined up correctly.

Install the Belleville washers with the dome facing up on the screws

and tighten the rotor (Figure 2).

Figure 1 Determining Rotor Screw Length.

ROTOR SCREW

RETAINING NUT

USE 3/4"

SCREW

2 - 5/8" Phillips Head Screws

2 - 3/4" Phillips Head Screws

3 - Belleville Washers

1 - 5/16" Phillips Head Screw

DOME MUST

FACE UP

ROTOR SCREW

RETAINER OR

THREADED BASE

USE 5/8"

SCREW

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

1 2

MSD Rotor, PN 84211 1
ADJUSTMENTS 2

Indice de contenidos

Pagina 1 - MSD Rotor, PN 84211

WARNING: Disconnect the battery during installation. When disconnecting the battery, always remove the negative cable ﬁrst and install it

Pagina 2 - ADJUSTMENTS

INSERT SCREWDRIVER AND ROTATE TO ADJUST PHASING10 INCREMENTSFigure 4 Adjusting the Rotor.DOME MUSTFACE UP5/16” SCREWCLOCKINGTABSPOSITION ON BASE AND R

Comentarios a estos manuales

Sin comentarios

Msd 84211 Rotor Phasing Kit for MSD Distributors Insta Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Msd 84211 Rotor Phasing Kit for MSD Distributors Insta. MSD 84211 Rotor Phasing Kit for MSD Distributors Installation User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Msd 84211 Rotor Phasing Kit for MSD Distributors Insta